NYGONE

Nygone® was created to resolve the issues related to safely removing cured polymer, resin and conformal Coatings. Nygone® will effectively remove most coating products without damaging the part, thus allowing the user an easy removal method.

It is occasionally necessary to remove polymer coatings to repair a component or some part of an assembly, or to disassemble parts. However, cured coatings are cross-linked, thermoset resins that do not melt and that may be difficult to remove from a substrate. Nygone® offers safe and effective removal of polymer coatings, minimizing possible damage to the part.

Heat, cold, and chemical exposure have commonly been the means of weakening and then removing adhesive bonds or coatings. Nygone eliminates the necessity to use these potentially damaging removal methods.

Store at 70F° to 120°F (21°C to 48°C)

Product Details

Industries

Solutions

Case Studies

3

Aerospace

Electrical bondings
avionics
wire-harness assemblie
light housing
radomes
galley connectors
entertainment systems
corrosion prevention on identification plates
actuators
hydraulic systems
fuel systems
friction and wear
interior protections of textiles, plastics, and metals

3

Automotive

Corrosion protection on fasteners
Metal and CF parts exposed to harsh environments
Electrical systems
Advanced driver assistance systems
PCBs
Wire bundles
Electrical systems exposed to high heat and freezing temps
Vibration/wear
Batteries, battery busbars, and cold plates
Materials and moving parts
Interior, anti-microbial, and anti-viral protection

3

Electronics

Material protection from lubricants and greases
Material protection from hydraulic fluids
Protection of actuators and sensors
Extreme high and low-temperature protection
Abrasion and impact protection
Microbial ingress protection (fungus testing to ASTM G-21)
Moisture protection

3

Marine

Ship Hull corrosion prevention above water line
Communication equipment
Electronic corrosion protection
High-touch microbial prevention
Label and placard protection
Any substrate for salt spray protection

3

Medical

Medical devices, diagnostic equipment, medical textiles
High-touch metal, plastic, and textile surfaces for microbial elimination and growth prevention
Prevent liquid and vapor permeation
Protect surfaces from impact and abrasion
Keep sensitive electronics sealed and safe-guarded

3

Military & Defense

Safe-guard electronic components
Protection of wire harness assemblies
Fuel bladder and system permeation protection
Sealant over or under other coatings
Protection from salt spray oxidation
Protection of metal, textile, plastic, and carbon fiber applications

3

Public Transportation

Corrosion on emergency windows, doors, metal, and rust from water collection
Electrical systems, circuitry, electrical components
Elements exposed to dirt, grease, and environmental elements
Microbial protection on interior high touch metals and plastics

3

Space

Sealant over composite joints
Vacuum bag seals
Wire bundles
PCBs
Space suits
Material protection from AO, UV, fuels, and high and low temps

3

Textile

Microbial
Odor control
Stain and wear prevention
Textile protection from cleansers and machine washing
Textile aging and aesthetics
Flammability control

Chrome Replacement

Chrome coating products will be phased out by 2026. To reach this goal, our customers are looking to Nycote as part of a schematic with other coatings to provide a solution. Nycote technology for chrome replacement constitutes one solution due to nylon epoxy encapsulation which is known for superior adhesion, chemical resistance, and permeation control.

Thinner & Surface Preparation

Using Nyclean and Thinner I is the perfect solution for surface preparation prior to applying any Nycote product.

Thinner Type II is used to thin our formulations for spray applications.

Removers

Nygone is an easy and effective way to remove cured polymer, resin, and conformal coatings. Nygone has the ability to remove polymers without damaging your substrates.

Friction Reduction

Nycote protects critical parts of your gear. Nycote is ideal for a range of applications such as aircraft moving parts, heavy machinery, and automotive and industrial applications. The strength of Epoxy combined with nylon flexibility is the perfect solution for encapsulating sliding and moving parts.

Electrical Bonding

Nycote® electrical bonding technology is the ultimate corrosion protection and your best defense against flashover and sparking.

Corrosion Prevention

Extend the life of your products with Nycote® nylon-epoxy polymer coatings which act as single source protection against salt spray, oxidation, acidic chemicals, conductivity, and other corrosive elements.

Contamination & Permeation Control

Nycote’s proprietary, high-performance liquid nylon-epoxy coatings provide the strength and flexibility required to contain fluids and vapors from permeating through a membrane. The ability of all Nycote formulations to adhere to many different substrates, including plastics, thermoplastics, metals, and textiles, makes our coatings a perfect partner for fuel, fuel bladder, and other liquid containment systems. All formulations are highly resistant to acidic chemicals and harsh environments.

Conformal Coating

Nyform is a non-conductive conformal coating for the protection of electronics and PCBs. The coating is durable and the thinnest, most lightweight conformal coating on the market, meeting the requirements of IPC-CC-830C, interchangeable with Mil-I-46058C. Nyform is removable and an anti-flashover, anti-tracking, insulative varnish suitable for electronics in all environments.

Conductivity Control

Trusted in aerospace for 60 years, Nycote’s liquid nylon surface protection is a revolutionary barrier against corrosion, friction, and wear. With nylon-epoxy encapsulation abilities, you can be sure that your components are completely sealed and protected for mission-critical applications.

Antiviral / Antimicrobial

Microbial solutions with our established and approved coating formulations. With Nycote coatings, you have peace of mind that you are protecting your surfaces and moving parts from corrosion and wear, as well as providing a permanent barrier against microbial proliferation. Nysafe includes a highly effective additive to our existing formulations that provides a permanent barrier against mold, fungus, Staphylococcus, S. Aureus, SARS CoV-2, and more.